Clearfill 300


AquaHealth offers the Clearfill 300 Sustainable Bottled Water Programs specifically to Bistros, Cafe’s and Spa’s.

  • 8.5″ w X 27.25″ d X 17.25″ hAquaHealth introduces the new clearfill300 series dispenser
  • One-valve dispenser – Available in Still only
  • Slim footprint will fit in any beverage station space
  • Perfect for Bistros & Cafe’s with lower bottled water consumption
  • Install it yourself in under an hour
  • Just add ice to achieve 38 degrees

INSTALLATION REQUIREMENTS

SPACE ALLOTMENT BASE: 8.5 inches wide x 27 1/4 inches deep HEIGHT: 17.25 inches SHIPPING WEIGHT 50 LBS OPERATIONAL WEIGHT 47.95 LBS REFRIGERATION: Top load with Ice


INSTALLATION CONSIDERATIONS The counter-top must support 50lbs for the dispenser. The space provided for the dispenser should allow for a minimum of 2 inches on each side and at the back to insure adequate ventilation. It may be necessary to drill a 2-1/2 inch hole in the counter-top to accommodate the product and the water lines.

ELECTRICAL REQUIREMENTS: None

 

 

PLUMBING REQUIREMENTS The Clearfill 300 is supplied with AquaHealth Premium Water, An AquaHealth water purification system is required. Incoming water pressure regulator (optional) install a 50lb pressure regulator if the source water pressure exceeds 50 psi.