Clearfill 350


AquaHealth offers the Clearfill 350 Sustainable Bottled Water Programs specifically to Bistros, Cafe’s and Spa’s.

  • 8.5″ w X 27.25″ d X 17.25″ hAquaHealth introduces the new clearfill300 series dispenser
  • Two-valve dispenser – Available in Still & Sparkling
  • Slim footprint will fit in any beverage station space
  • Perfect for Bistros & Cafe’s with lower bottled water consumption
  • Install it yourself in under an hour
  • Just add ice to achieve 38 degrees

 

 

 

 

INSTALLATION REQUIREMENTS

SPACE ALLOTMENT BASE: 8.5 inches wide x 27 1/4 inches deep HEIGHT: 17.25 inches SHIPPING WEIGHT 50 LBS OPERATIONAL WEIGHT 47.95 LBS REFRIGERATION Top load with Ice

INSTALLATION CONSIDERATIONS The countertop must support 50lbs for the dispenser. The space provided for the dispenser should allow for a minimum of 2 inches on each side and at the back to insure adequate ventilation. It may be necessary to drill a 2-1/2 inch hole in the countertop to accommodate the product and the water lines.

ELECTRICAL REQUIREMENTS: Carb unit only 115 VAC, 60 HZ, 1PH, 1.0AMP grounded duplex outlet ALL ELECTRICAL WIRING MUST CONFORM TO NATIONAL AND LOCAL ELECTRICAL CODES.

PLUMBING REQUIREMENTS The Clearfill 350 is supplied with AquaHealth Premium Water, An AquaHealth water purification system is required. Incoming water pressure regulator (optional) install a 50lb pressure regulator if the source water pressure exceeds 50 psi.